View HD74HC182_1248312.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC182
Look-Ahead Carry Generator
Description
The HD74HC182 is a high-speed Carry Lockahead Generator. It is used with the HD74HC181 4-Bit Arithmetic Logic Unit to provide high-speed lockahead over World lengths of more than four bits. The device accepts up to four pairs of active-low Carry Propagate (P 0, P1, P 2, P 3) and Carry Generate (G0, G1, G 2, G3) signals and an active-high carries (C n+x, Cn+y, Cn+z) across four groups of binary adders. The HD74HC182 also has active-low Carry Propagate (P) and Carry Generate (G) outputs which may be used for further levels of lockahead. The logic equations provided at the outputs are: C n+x = Y0 (X0 + Cn) C n+y = Y1 {X 1 + Y0 (X0 + Cn)} C n+z = Y2 [X2 + Y1 {X 1 + Y0 (X0 + Cn)}] Y = Y3 (X3 + Y2) (X3 + X2 + Y1) (X3 + X2 + X1 + Y0) X = X3 + X2 + X1 + X0 or C n+x = G0 + P0Cn C n+y = G1 + P1G0 + P1P0C n C n+z = G2 + P2G1 + P2P1G0 + P2P1P 0C n G = G3 + P3G2 + P3P2G1 + P3P2P 1G0 P = P3P2P 1P 0 Also, the HD74HC182 can be used with binary ALUs in an active-low or active-high input operand mode. The connections to and from the ALU to the carry lookahead generator are identical in both cases.
HD74HC182
Features
* * * * * High Speed Operation: tpd (Pn to P) = 11 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C)
Pin Designations
Item G0, G1, G2, G3 P0, P1, P2, P3 Cn Cn+x, Cn+y, Cn+z G P VCC GND Pin No. 3, 1, 14, 5 4, 2, 15, 6 13 12, 11, 9 10 7 16 8 Functions Active-low carry generate inputs Active-low carry propagate inputs Carry input Carry outputs Active-low carry propagate output Active-low carry propagate output Supply voltage Ground
2
HD74HC182
Pin Arrangement
G1 1 P1 2 C0 3 Inputs P0 4 G3 5 P3 6 Output P7 P1 G0 P0 G3 P3 P G1 P2 G2 Cn Cn+x Cn+y G
16 VCC 15 P2 14 G2 13 Cn 12 Cn+x 11 Cn+y 10 G 9 Cn+z (Top view) Outputs Inputs
Cn+z
GND 8
Logic Diagram
P
G P3 G3
Cn+z P2 G2
Cn+y P1 G1 P0 G0 Cn
Cn+x
3
HD74HC182
DC Characteristics
Ta = 25C Item Input voltage Symbol VIH Ta = -40 to +85C Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 1.0 40 A A I OL = 4 mA I OL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 A V I OH = -4 mA I OH = -5.2 mA Vin = VIH or VIL I OL = 20 A V Vin = VIH or VIL I OH = -20 A V Unit V Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 -- 3.15 -- 4.2 -- -- -- -- -- -- -- -- -- -- 0.5 1.5 3.15 4.2 --
VIL
2.0 4.5 6.0
1.35 -- 1.8 -- 1.9 4.4 5.9 4.13 5.63 -- -- --
Output voltage
VOH
2.0 4.5 6.0 4.5 6.0
1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- 5.68 -- -- -- -- -- -- -- -- -- --
VOL
2.0 4.5 6.0 4.5 6.0
0.0 0.1 0.0 0.1 0.0 0.1 -- -- -- --
0.26 -- 0.26 -- 0.1 -- 4.0 --
Input current Quiescent supply current
Iin I CC
6.0 6.0
4
HD74HC182
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Symbol Ta = -40 to +85C Max 175 35 30 190 38 33 230 46 39 95 19 16 10 pF ns ns Pn or Gn to output ns Cn to output Unit ns Test Conditions Pn to P
VCC (V) Min Typ Max Min 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 11 -- -- 15 -- -- 17 -- -- 5 -- 5 140 -- 28 24 -- --
Propagation delay t PLH time t PHL
150 -- 30 26 -- --
185 -- 37 31 75 15 13 10 -- -- -- -- -- --
Output rise/fall time
t TLH t THL
2.0 4.5 6.0
Input capacitance
Cin
--
5
19.20 20.00 Max 16 9 7.40 Max 6.30
Unit: mm
1 1.3
1.11 Max
8
0.51 Min
2.54 Min 5.06 Max
7.62
2.54 0.25
0.48 0.10
0.25 - 0.05 0 - 15
Hitachi Code JEDEC EIAJ Weight (reference value)
+ 0.13
DP-16 Conforms Conforms 1.07 g
Unit: mm
10.06 10.5 Max 16 9
5.5
1
*0.22 0.05 0.20 0.04
8 0.80 Max
2.20 Max
0.20 7.80 + 0.30 -
1.15 0 - 8 0.70 0.20
1.27 *0.42 0.08 0.40 0.06
0.12 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DA -- Conforms 0.24 g
*Dimension including the plating thickness Base material dimension
0.10 0.10
0.15
Unit: mm
9.9 10.3 Max 16 9 3.95 1 1.27 0.635 Max 8
0.11 0.14 + 0.04 - 1.75 Max
*0.22 0.03 0.20 0.03
0.10 6.10 + 0.30 -
1.08 0 - 8
0.67 0.60 + 0.20 -
*0.42 0.08 0.40 0.06
0.15 0.25 M
*Dimension including the plating thickness Base material dimension
Hitachi Code JEDEC EIAJ Weight (reference value)
FP-16DN Conforms Conforms 0.15 g
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

▲Up To Search▲

Price & Availability of HD74HC182

	To Download HD74HC182 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .